Products distributed by:

BernClare Multimedia Inc.
Tel: 905-513-2722
e-mail: info@bernclare.com
Markham, Ontario, Canada

Presents H264 hardware compressed:
Hybrid PC DVR NVR cards

HikVision Products with enhanced "NV" NVR software
HikVision based
H264 NVR card
for system integrators, installers, dealers, resellers, IT personnels, users experienced in networks.
                Back to:
www.bernclare.com
www.remote-security.com

"NV software" supports:  |   HiKvision DVR cards   |   Dahua DVR cards   |   MegaPixel IP cameras   |   Standalone DVRs   |   IP servers  |

Trial NVR Software: (supports DVR cards, IP cameras and IP servers from HikVision, Dahua and DG.)
- Please download to test out its features
- Need NV card/license for full operation



Hardware compressed H.264, Hybrid PCI cards
NVR supports CCTV & Mega Pixel Hi-Def IP cameras, DVRs
Mac and PC compatible client s/w
ONVIF compatible


Hardware features
  • HikVision DS40xxHC and DS42xxHFV encoder cards: all channels record @30fps with audio, up to 64 cctv or IP cameras per PC. OEM s/w is available.
  • HikVision DS400xMD series matrix output: 2 or 4 channel TV matrix output, fully flexible for output configuration. OEM s/w is available.
  • On board hardware encoding to H.264, does not use up any CPU cycles. An "old" 3GHz P4 can handle 64 channels all @30fps CIF at only 20% CPU cycles. This makes the DVR very stable.
  • Expansion by adding addition cards that can be a mix of 4,8,16 channels.
  • For DS40xxHC cards, all channels can be set to encode as 30fps, video+audio, CIF(352x240pixels) or 2CIF(528x360pixels) with "Dual stream" feature. Users can use s/w to combine two channels to create 4CIF(704x480pixels) resolution, also @30fps video+audio , dual stream.
  • "Dual stream" means double encode in real time; main stream can be set to high resolution, high frame rate, high quality for storage and for LAN streaming; sub-stream can be set to lower parameters to fit into Internet bandwidth limitations. Remote users can view with their selection on main or sub streams.
  • For DS40xxHC cards, if dual stream is not needed (e.g. for LAN only, not for Internet), users can set all channels to 4CIF resolution at 12fps, without using dual stream, and without the need to combine two channels to one.
  • DS42xxHFV is a new model that supports dual stream, 4CIF, 30fps video+audio for all channels, up to 16 channels per card. Can install Only two cards per computer.
  • Same s/w supports HiKvision and Dahua cards on one computer.
  • Two card types, PCI and PCI-e, can be mixed.


HikVision Products supports iphones
Supports iphones, Black Berry, Android
Introduction

H.264 is MPEG4 Part 10/AVC codec that provides high compression, high quality video, best suited for surveillance application. It makes use of block transfers and motion compensated predictive coding. When compared with MPEG2 coding, MPEG4 ( H264 ) uses 1/3 of the bandwidth (1/3 of storage space) to deliver the same quality video. When compared with MPEG4(ASP), MPEG4 (H264) uses 3/5 of the bandwidth ( 3/5 of storage space) to deliver the same quality video. These cards can be mixed and stacked for expansion.


Encoded samples @840MB per hour, video+audio, 4CIF (704x480 pixels)
You can right click on the video to view at full screen.
IE browser users: allow Windows Active-X to play the video
Google Chrome & FireFox: download the "windows media player firefox plugin" to play.

NV enhanced software feature
  • NVR s/w supports DVR cards and DVRs from HikVision and/or Dahua; Hi-Def IP cameras from Hikvision, Dahua, DG, Sony, Axis, ACTi and Camtron.
  • NVR GUI can easily be customized for your corporation.
  • *** Supports Windows7(32/64bit), Vista(32/64 bit), WindowsXP, 2003, 2000
  • *** Supports Android, iphone, ipads, Black Berry, Symbian OS based hand helds.
  • *** Mac and Windows Client s/w
  • *** Supports ONVIF (International standard interface for IP camera protocol)
  • *** Supports MegaPixel HiDef IP cams from Hikvision, Dahua, DG.
  • Supports POS (point of sales) as overlay to video and data is stored as database.
  • Supports access cards.
  • Allow instant playback while monitoring. Right click on one or more channel(s) for immediate playback while monitoring other channels.
  • Supports 128 presets, 10 programmable routes for PTZs, return to default preset/route within a preset time. On-screen PTZ control by mouse.
  • Motion sensing, private masking, alarm pop-up, E-mail alert, E-map, two way audio.
  • Remote viewing via web browser and/or Remote Client using only 1 and 2 Internet ports respectively
  • Remote Client supports and connects simultaneously to H.264 PC-DVR cards, IP cameras, NVR and video servers. 64 appliances per page, 16 pages.
  • Remote client can monitor, record, remote control, re-configure server(s)and other appliances.
  • Click here to sample this s/w. You can try this s/w on HikVision, ILDVR, Netvision, Dahua, DG, Adventurer cards. Without a license, it works for 30 minutes and you would have to restart. Contact us @905-513-2722 if you like to apply this s/w on your cards. This s/w is free if you purchase HiKvision, Netvision, Dahua and DG product from us.
Why HiKvision cards with OEM (enhanced NV) s/w?
  • HikVision provides "basic" application software. The product is meant for OEMs to enhance the s/w before being used, or resell. Many dealers would not bother to re-write the software, therefore, the s/w capability is limited. Our software has implement lots of enhancement features and is the most comprehensive compared with similar products in the market. The software is updated regularly, about 2~3 times a year.
  • NV software is the first to support ONVIF (International standard interface for IP cameras), 64 bit windows, iphones, ipads, Black Berry, Android, and has written the client s/w for MAC.
  • NV software supports HikVision, Dahua, DG family of products: PCI cards, PCI-Express cards, standalone NVR, Video servers and IP cameras.  Since they use the same hardware encoder, one set of software can manage all of these many devices.  Internet Explorer with the same active-X can view all of these appliances.  The client software, called "Remote Client", is Windows and Mac compatible, and can connect to 64 different appliances at the same time. Data files from all these appliances are common in format, which is the first in this industry.
  • CMS (Central Monitoring Station) software for HK cards can handle up to 10,000 cameras.





Encoder and Matrix ouput card types
  • You can mix install multiple cards, limit is 64 channels per PC.
  • Encoder Models
    • DS4004HC: 4x"2CIF" S-VHS quality, dual stream
    • DS4008HC: 8x"2CIF" dual stream
    • DS4016HC: 16x"2CIF" dual stream
    • DS4216HFV: 16x"4CIF" dual stream
  • Matrix output to TV
    • DS4002: 2-NTSC/PAL output.
    • above output channels can independantly configurable to display 1,2,4,9,13,16 windows. Assign your camera(s) to any window.
  • CIF=352x240 pixels, 2CIF=528x360,
    D1 or 4CIF=704x480 for NTSC
    PAL users replace 240 with 288, 360 with 432, 480 with 576
Card Type Multiple configurations for encoders (support dual streams, 30fps per channel)
CIF
VHS-like
quality		 2CIF
S-VHS like
quality		 4CIF
(Full D1)
DVD like
quality		 Mix of low (CIF, 2CIF)/high(4CIF) resolution
352x240 528x360 704x480 Combine two CIF channels
to make one 4CIF
DS4004HC** 4ch. 4ch. 2ch. 4chs@2CIF or 2chs@2CIF+1ch@4CIF, or 2chs@4CIF, all @ 30fps
DS4008HC** 8 8 4 8chs@2CIF or 6chs@2CIF+1ch@4CIF, or 4chs@2CIF+2ch@4CIF,.... or 4chs@4CIF, all @ 30fps
DS4016HC** 16 16 8 16chs@2CIF or 14chs@2CIF+1ch@4CIF, or 12chs@2CIF+2ch@4CIF,.... or 8chs@4CIF, all @ 30fps
DS4216HFV 16 16 16 16chs@CIF, 2CIF or 4CIF all @ 30fps with 1 ch. video out.
No need to combine two chs. to make 1 4CIF.
**If you do not need dual stream and is OK with <12fps, you can assign any channel of DS40xxHC cards to run on 4CIF. There is NO need to combine channels in this case.




Specification:
Compression Hardware compressed H.264 (MPGE4 profile10)
Video Input 4,8,16ch per card @352x240 and 528x360 H264. S/w configurable to 2,4,8ch per card @704x480.
Audio Input 4,8,16ch per card, mono, G.722 16Kbps (OggVorbis audio compression standard).
Video FormatNTSC/PAL @32bit true color
Displaying SpeedEach channel NTSC:30fps, PAL:25fps
Recording SpeedEach channel NTSC:30fps, PAL: 25fps
Multiple CardsUp to 64 channels, can use PCI extender bus.
Preview Resolution704x480 pixels at 30fps
Recording Resolution352x240 pixels 30fps per channel, or 704x480 30fps when combining two channels together.
Image File Size0.5K~2.2KB
Video compressionOutput: 32kbps-1000kbps(CIF) or 70kbps-4000kbps(4CIF)
Motion DetectYes
WatermarkYes
DI/DOYes (selected).
PTZ ControlYes, with presets, touring and panning functions for some PTZs. Supports Panasionic, Pelco-P, Pelco-D, Philips, PIH, Samsung, TD-500, VCON, Yaan. Control camera with softkeys and with mouse.
Network ConnectionLAN/PSTN/ISDN/ADSL/Internet: Static & Dynamic IP
OSWindows2000/XP/VISTA/Windows7 32/64 bit



Software Feature:
POS Supports multiple POS with data overlay to video and also saved in database.
IP cam Mix of cctv and IP cams, up to 64. Records native resolution and frame rate on IP cams, up to Hi-Def Mega Pixel IPcam, 1920x1080p 30fps.
IP cam types Supports IP cams from HikVision, Sony, Mobotix, AcrontVision, Huviron, Acti, Dahua etc.
IP PTZ, ePTZ Users, if viewing the Mega Pixel screen at lower resolution, can "Pan, tilt and Zoom" within the screen as if they are using an electronic PTZ.
Hand helds Supports Black Berry, iphones, and cells
Multiple resolution1920*1080, 1280*1024, 1440*900, 1280*768, 1024*768
Dual screen Supports Dual monitors.
Security Password Multiple users and feature related password protection
System size 4, 8, 16 channels (per card), up to 64 channels per system.
Language support Multiple languages.
GUI changes Neutral software available, allows GUI design changes on an installable CD.
Watchdog Software Watchdog
HDD Remaining DisplayYes
Video Loss DetectionYes
Motion detection, I/O control24hours x7 days scheduled motion detection, can work with i/o control
Display cameras64 CIF (352x240 pixels) or 32 Full D1 (704x480 pixels) channels
Alarm alert functionAlert via IP, screen pop-out at remote view, E-mail out, i/o relay triggering to other systems.
**Instant playback function**User can playback 2,4, 8 mins of video on any camera while monitoring.
ArchivingArchive to CD/DVD or to hard drives. Archived video can be played back on another computer without installing the codec.
Log searchSmart search based on motion detection, alarm trigger, and time event. Can play back 8 time-aligned screens simultaneously.
Pre, Post Event Recording1~3 minutes pre, post-alarm recording (Motion detect and sensor trigger)
Remote Web accessWeb access using Active-X. Web access supports up to 16 camera live view, Live center supports 64 video-channel per page, 16 pages, totalling 1024 cameras with IP maxtrix switching technology.
Remote Live viewFree Live center supports 400+ server access and your choice of cameras on these servers. Quad function: monitor, record, review log files, and remote control of the server. TV output using matrix switches.
Assignable TCP/IP portsDefault and user assigned TCP/IP ports. Supports DNS. Use only 3 ports for: remote log in via internet browser, and/or Live Center (Lient software).
PTZ (Speed Dome) Camera Control camera with softkeys and with mouse. Point the mouse onto the video and the camera will pan/tilt/zoom. 128 programmable presets and 10 routes. Default to assigned preset/route once camera is idled.
Web BrowserMonitor, playback, P/T/Z/F Control, recording, review log files.
Remote Client Monitor, playback, P/T/Z/F Control with programmed presets and tours, recording, review log files on client and server(s), re-configure server(s).
Remote RecordingYes
Remote TalkingYes
Remote AlarmingYes
E-map Drag and paste camera icons onto office map, icons will change color on alarm


Compatible Hardware List:
Avoid using VIA and SIS chipset motherboards. HikVision System does not work with those hardware components properly.
Motherboard
Any motherboards (Asus, Microstar, Gigabyte, Intel, ECS) with Intel chip sets such as:
Intel 6 series chipsets(P55). **** Works only with PCI cards as: NV4004HC, DG4004HC, DG4208HF and PCIe cards as DG4008HCe, DG4016HCe, 4208HFe, 4216HFe ****
Intel 5 series chipsets(P55)**** All cards****
Intel 4 series chipsets(P43, P45) **** All cards****
Intel 3 series chipsets(G31, P31, P35) **** All cards****
Motherboards with Intel 945/965 chipsets **** All cards****
Examples:
Garmen motherboard with Intel 915 chipsets
GigaByte GA-H67A-UD3H motherboard with Intel H67 Express Chipset(cards, not for IP camera)
Asrock N68C-SVC with NVIDIAŽ GeForce 7025 / nForce 630a chip set, G force 7025 on board graphics, AMD dual core 3GHz

Please note: we can test only a few of motherboards in the market.
CPU Intel P3, C4, P4, Core3, Core4
RAM 128/256/512/1024MB 1024MB is for 64 channel system
Display card ATI Radeon X1650/X1600 /X1550/X1300/X800/X600/X550/HD2400/HD2600
ATI Radeon 7000/7200/7500/8500 /9000/9200 /9500/9600
NVIDIA GeForce 8600GT/8500GT/8400GS/7600/7300LE/6600LE/6200LE
Nvidia Tnt/Tnt2, Geforce Mx 200/400/420/440 Fx5200/5600
INTEL845G/865G/ 915/945G/G31 integrated display unit
MatroxG450/550
Notice:
1.-For GeForce 8400GS, 8500GT, 8600GT, 9400, 9500, 9600, 9800, it is suggested to use card SDK version higher than V4.3
2.-It is suggested to use the latest driver for most of the display adapter above, but for the models listed below, it is possible that the latest driver will not support card live-view display, and you'll need to install the driver version as the list indicates:
NVIDIA Tnt/Tn2, Geforce Mx 200/400: V2720 driver (2002)
NVIDIA MX440/FX5200/FX5600: V53.03 driver
Intel 845G/865G onboard display unit: WIN2K_XP135 driver (2003) ATI Radeon 9200: V6.14.10.6414 driver
Power 360W recommended if the system has more than 4 cards (over 16 video channels)